Eye4Software Hydromagic

  Hydrographic Survey Software

Download free demo version

Eye4Software Hydromagic - Knowledge Base - Tags - Tides

Q140001 Does your software support RTK tides ?
Yes, Hydromagic is capable of calculating tide levels realtime by using a RTK receiver. In order to calculate tide, a geoid model for the region has to be loaded. You also have to configure the vertical datum and antenna height. Tide calculation only works in "RTK Fixed" mode, so a r ...
Tags:  Tides, RTK, RTK Tides, Geoid Model

Q140002 Does the software support tide corrections ?
Yes, Hydromagic supports multiple tide correction methods. The following methods are supported: Automatic tide correction using a RTK (network) rover Manual tide correction during sounding Manual tide correction during post processing Automatic tide correction using tide ...
Tags:  Tides, Tide Correction, Manual Tide Correction, Automatic Tide Correction, Tide Prediction

Q140003 When tide corrections are applied, some depths are negative, why is this ?
When tide corrections are applied, the sounding values are referenced to a local datum. This means that all sounding values are now (orthometric) heights instead of depths. In fact, you are measuring the elevation of the river bed instead of the depth itself. ...
Tags:  Tides, Tide Correction, Orthometric Heights, Elevation, Vertical Datum

Q140005 What do I have to enter for antenna height in the RTK settings?
To use RTK tides using a RTK receiver and a geoid model, it is required to set the height of the antenna above the water surface. Please note that you use the phase center of the internal antenna instead of the bottom of the antenna.If you do not configure a draft for the echosounder, it is also po ...
Tags:  Tides, RTK, draft, antenna height, antenna