| Q140001 | Does your software support RTK tides ? |
| Yes, Hydromagic is capable of calculating tide levels realtime by using a RTK receiver. In order to calculate tide, a geoid model for the region has to be loaded. You also have to configure the vertical datum and antenna height. Tide calculation only works in "RTK Fixed" mode, so a r ... | |
| Tags: tide, RTK, RTK tide, tide calculation, geoid, geoid model, antenna height, water level, vertical datum |
| Q140005 | What do I have to enter for antenna height in the RTK settings? |
| To use RTK tides using a RTK receiver and a geoid model, it is required to set the height of the antenna above the water surface. Please note that you use the phase center of the internal antenna instead of the bottom of the antenna.If you do not configure a draft for the echosounder, it is also po ... | |
| Tags: tide, RTK, RTK tide, tide calculation, geoid, geoid model, antenna height, water level, vertical datum, draft, static draft |
